![]() ![]() ![]() A 7 to 16-digit Admin PIN must be established before the key can be used. Note: If the key has never been used, the BLUE and GREEN LEDs will glow solidly indicating that the Admin PIN must first be established before the key can be used.Įach Aegis Secure Key is shipped without a preset Personal Identification Number (PIN) installed on the key. The RED LED will glow solidly (standby state.) To wake the key so it can accept keypad inputs, press the button once. While in this state, the key is locked and cannot be accessed. ![]() When the key is not in use, it will enter a sleep state. If the battery is completely discharged, the key will go through a self-test (indicated by a RED, GREEN, and BLUE LED sequence) when plugged into a USB port. The RED LED will pulse while plugged into a powered USB port even though it may be fully charged. In standby mode, the RED LED fades in and out slowly to indicate that it’s charging and glows solid RED to indicate that it’s fully charged. The battery will automatically charge whenever it is plugged into a powered USB port, regardless of its operational mode. Before initial use, we recommend plugging the key into a powered USB port for 80 minutes to fully charge the battery. For safety, each key ships with a partial charge. The Aegis Secure Key has an internal rechargeable battery with a smart-charging circuit. Enter all PINs and command codes onto the Secure Key’s keypad PRIOR to plugging the device into the USB port for use. The resulting downward pressure exerted can damage the Secure Key’s USB connector and the computer’s USB port, causing both to malfunction. Technical Support / Warranty and RMA informationĭO NOT PRESS ANY BUTTONS WHILE THE SECURE KEY IS INSERTED INTO A COMPUTER USB PORT. Hibernating or Logging Off from the Operating System ![]() Initializing and Formatting After a Complete Reset Setting LED Flicker / Button Press Indicator Mode Setting Read-Only or Read / Write Modes from the User Mode Setting Read-Only or Read / Write Modes from Admin Mode Adding a New User PIN (Via User Forced Enrollment Mode) ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |